LM8005 Hydraulic Separators
Model:LM8005
Material:Brass Hpb 57-3
Working pressure::6bar
Hydraulic separator
In a hydraulic HVAC setup, if the building or home uses both heating and cooling or has multiple circuits for additional load systems, a hydraulic separator is a great option for preventing flow from another circuit
- Product Introduction
| Material: | Steel |
| Insulation Material: | EPP black |
| Maximum flow: | 18 m3/h |
| Maximum working temperature: | 110°C |
| Maximum working pressure: | 8 bar |
Advaned heating distribution system
Product advantage:
![]() |
What does the hydraulic separator do?In a hydraulic HVAC setup, if the building or home uses both heating and cooling or has multiple circuits for additional load systems, a hydraulic separator is a great option for preventing flow from another circuit. They eliminate the need for multiple parts add on parts that are normally be included in setup. With one hydraulic separator you no longer need a primary loop circulating pump, air separator, and strainer. It also improves and allows multiple circulators to operate independently without interfering with each other. The Hydraulic Separator has a unique dirt separator feature that eliminates any debris inside the circuits. This is possible because of the magnet and metallic mesh surfacing that catches impurities that then are removed through the discharge valve. |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
We also have other kind of mixing water valves,manifold,thermal actuator,mixing unit,barrel tap,kindly check our website: www.laimeng-fluid.com for more other products.

Company Profile
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
|
.
Also we can do all according to the clients requiements.
Packaging & Delivery
Packaging Details
Mixing units for underfloor heating manifold for water heating system
1. Regular Packing:
Inner packing: small box
Outer packing:Five-layer corrugated box
Bulk container /with pallets
2. Packing can be customized with your own brand and logo
Port
NINGBO/SHANGHA


When is a hydraulic separator my best option?
These separators thrive in low temperature setups. The hydraulic separator can function anywhere from 40 to 260-degree settings for chilled water. Another major benefit to a separator comes from its ability to separate microbubbles of air passing through the upper portion. This usually is the task of an air separator.
Without some source of fluid condensing issues will start to arise within the hydraulic system. You could potentially risk lubrication issues, unusual noises, poor response time from equipment, fluid degradation and unnecessary temperature rise. If you are looking for a simple solution for multi-zone systems or just want to save time and money on parts, the hydraulic separator is truly the best bang for your buck.
We can supply an extensive line of hydraulic valves, manifold, pumps group,electric thermal actuator and much more here at TAIZHOU LAIMENG FLUID CONTROL CO.,LTD . For more information check out our hydronic product overviews. We also have other kind of hydronic separator if you're interested in , as always, contact us with any questions you might have about hydraulic separators or other hydronic equipment.
Our products as following:
Valves: Brass ball valve,Brass gas valve,Brass radiator valve,Brass air vent valve,Brass drain valve,Brass check valve,Brass pressure reducing valve
Electric thermal actuator, Brass bibcock/Barrel tap,Mixing water unit,pre filter,pump group
So if you have any question or any inquiry for the above products that you can contact with us.
Hot Tags: lm8005 hydraulic separators, China lm8005 hydraulic separators suppliers, manufacturers, factory


























