Temperature Control Valve For Underfloor Heating System Parts

The radiator temperature control valve is an automatic control valve installed on the radiator. The radiator constant temperature valve is a proportional control valve that can operate without the need for external energy. It adjusts and controls the indoor temperature by changing the flow rate of heating hot water, and is an economical and energy-saving product. Its control component is a temperature bulb filled with temperature sensing substances. When the room temperature rises, the expansion of the temperature bulb causes the valve to close, reducing the hot water supply to the radiator. When the room temperature drops, the process is reversed, thus achieving the purpose of temperature control. The radiator temperature control valve can also adjust the set temperature and automatically control and adjust the hot water supply of the radiator according to the set requirements

 

 

 

 

We are LAIMENG FLUID CONTROL CO., LTD which is a manufacturer for SS manifold,brass manifold,bronze manifold for plumbing, heating and refrigeration systems .We are also mainly in producing thermal actuator ,Mixing  water temperature control center,Electric thermostat for floor heating , water intelligent manifold , brass valves and fittings,mixing valve.

Packaging Details

 

Good quality Newly Supply Heat control valve  Thermostatic valve
1. Regular Packing:
Inner packing: small box
Outer packing:Five-layer corrugated box
Bulk container /with pallets
2. Packing can be customized with your own brand and logo

Port

NINGBO/SHANGHA

 

 

 

 

 

The radiator constant temperature control valve, which is composed of a temperature bulb and a valve body, is called a built-in constant temperature valve.

1.What is the Installation points for thermostatic radiator valve?

1. As the thermostatic valve needs to sense indoor temperature, it is necessary to ensure that the temperature bulb of the thermostatic valve is in a relatively open space with unobstructed airflow during installation. The temperature bulb of the built-in sensor must be installed horizontally and cannot be installed vertically upwards. When the sensor is obstructed by curtains or other objects, affected by the surface temperature of the heating pipeline, or cannot be installed vertically, an external sensor temperature bulb must be used. Place it away from curtains and pipes, and connect it to the main valve body through its own capillary tube.

2. The valve body and pipeline are connected through threads, and the valve core can be replaced without the need for water drainage in the system (special tools are required). Therefore, it is required that there is corresponding operating space around the thermostatic valve and it is firmly connected to the pipelines on both sides.

 

Hot Tags: temperature control valve for underfloor heating system parts, China temperature control valve for underfloor heating system parts suppliers, manufacturers, factory, brass radiator bleed valve, antique brass bleed valve, brass corner radiator valves, brass traditional radiator valves, brushed brass straight radiator valves, brushed brass corner radiator valves