Hydraulic Separators

Hydraulic Separators

Model:LM8004
Material:Brass Hpb 57-3
Working pressure::6bar Hydraulic separator The Hydraulic separator mainly divides the entire water system into two parts: the circulation system. Hydraulic separator can reasonably distribute traffic and ensure the security of the entire system.

  • Product Introduction

 

Material: Steel
Insulation Material:  EPP black
Maximum flow:  18 m3/h
Maximum working temperature:  110°C
Maximum working pressure:  8 bar

Advaned heating distribution system

Product advantage:

 

 

He74db8404847401487866606872bde0dn

Description:

Hydraulic separator CPN is a compensation chamber which renders connected independent hydraulic circuits. It is usually installed when the primary circuit pump interacts with one or more pumps of the secondary circuit in the same system. Therefore, it avoids problems relating to fl ow rate variations and circuit prevalence. It is made in square section steel, painted and insulated with EPP.
8001 8002 8003
8004 8005 8006
1001 1002A 1006

 

We also have other kind of mixing water valves,manifold,thermal actuator,mixing unit,barrel tap,kindly check our website: www.laimeng-fluid.com for more other products.

 

Mixing water valve  Used 

 

pump group installHa667b7e20f4b458b803711a91c4cbf9be

     

pump group drawing

Delivery/return outputs reversibility

The pump group is pre‐assembled for the upper supply typeon the right side of the water supply (also equivalent to the lower supply type on the left sideof the water supply). According to the requirements of the installation site, the delivery and returnoutputs can be exchanged.

 

Company Profile

product-400-279 product-400-279
product-200-133 product-200-133 product-200-133 product-200-133

 

About Us

TAIZHOU LAIMENG FLUID CONTROL CO., LTD is a manufacturer integrating R&D, production and sales which provides one-stop service and solution for plumbing, heating and refrigeration systems of the global market. We are mainly specialized in producing thermal actuator ,Mix water temperature control center,Electric thermostat for floor heating , water intelligent manifold , brass valves and fittings .

 

If you have any SS manifold,brass manifold,brass valves,mixing valves,radiator valve,air vent valves,pump group that you can contact with us free.

 

Warmly welcome to visit us and sincerely hope to cooperate with you!

. 

Also we can do all according to the clients requiements.

Packaging & Delivery

Packaging Details

Mixing units for underfloor heating manifold for water heating system
1. Regular Packing:
Inner packing: small box
Outer packing:Five-layer corrugated box
Bulk container /with pallets
2. Packing can be customized with your own brand and logo

Port

NINGBO/SHANGHA

product-559-249

A hydraulic separator – now increasingly found in hydronic heating and cooling systems.How Does A Hydraulic Separator Work?
A hydraulic separator with closely spaced tees – a top tee and a bottom tee.
There are three possible flow paths, all of which are dependent on the flows within the primary and secondary circuits. Let's take a heating system as an example to explain the different flow paths.
Flow Path 1
Flow in the primary circuit is the same as the flow in the secondary circuit. Referred to as a balanced flow, this flow and temperature from the boiler would be equal to the distribution system. Hot water from the boiler would be isolated in the top tees or Ports 1 and 2.
The bottom two tees – Ports 3 and 4 – work in a similar way, with the flow and temperature from the boiler the same as those of the water going back into the boiler. This ensures that mixing in the separator is minimal.

Flow Path 2

Another example is the flow of the secondary circuit, where the flow is greater than the first.

In this instance, the flows are not balanced and the temperature going into the circuit is not the same as the temperature from the boiler. In order to satisfy demand, part of the water returning from the system in Port 3 mixes with the water entering the PSH (Primary Secondary Header) from the boiler at Port 1. This means that the temperature flow is lower at the second tee entering the system.

Flow Path 3

In the third flow path, flow in the primary circuit is bigger than the flow in the secondary circuit. This means that the flow is unbalanced, but in the opposite way to Flow Path 2; the system requirement is less than the boiler output.

Flow returning from the system mixes with the hot water from the boiler, increasing the boiler return temperature.

In all of the flows described above, air and dirt are separated from the water that enters the Hydraulic Separator.

At MCH Hydraulics, we pride ourselves on our highly skilled and expertly trained team. So whatever your requirements we can ensure that you get exactly what you need. Contact us today to discuss your requirements.


Our products as following:

Manifold: Stainless steel manifold,Brass manifold,Bronze manifold
Valves: Brass ball valve,Brass gas valve,Brass radiator valve,Brass air vent valve,Brass drain valve,Brass check valve,Brass pressure reducing valve
Electric thermal actuator, Brass bibcock/Barrel tap,Mixing water unit,pre filter,pump group

So if you have any question or any inquiry for the above products that you can contact with us.

Hot Tags: hydraulic separators, China hydraulic separators suppliers, manufacturers, factory

Send Inquiry

(0/10)

clearall