Thermostatic Actuator
LM-713 The Electro-Thermal Actuator is using for floor heating manifolds,central air conditioning(water system) small valve to opening and close.The normal close actuator is automatic opening after power up.
- Product Introduction
The thermo-electric actuator is installed on the underfloor heating manifolds and controlled remotely by room thermostats to open or close valve for individual circuits/loops.
 |
 |
For a normally closed (NC) thermo-electric actuator, the valve being controlled stays closed when the actuator is powered off. When there is a demand to increase the room temperature from the thermostat, the thermo-electric actuator powers on. The thermal actuator inside the thermo-electric actuator starts heating up, and its piston pushes out as the wax expands. Then the valve is opened, and the hot water starts to flow in the corresponding circuit/loop for this room. As the result, the room temperature increases gradually to reach the set value on the thermostat.
The thermo-electric actuator powers off when the room temperature reaches the set value. The thermal actuator inside the thermo-electric actuator cools down. Then the piston returns to its initial position with the assistance of the return spring to close the valve. The hot water stops flowing in the circuit/loop as the valve is closed.
|
Model |
LM-713 |
|
Working Voltage |
230VAC/24 VAC |
|
Protection Grade |
IP54 |
|
Storage Temperature |
-20-70℃ |
|
Running Time |
≤5 Minutes(at 25℃) |
|
Cable Length |
100cm |
|
Connection |
M30*1.5MM |
|
Working Journey |
≥4.5mm |
|
Thrust |
110N |
|
Shell material |
Inflaming retarding(PC) |
Product Images
Company Profile
 |
 |
 |
 |
 |
 |
If you are looking for the Brass Radiant Heat Manifold Set With 1/2" Adapters,
stainless steel heat pump floor heating water distribution radiant heat pex manifold compression fittings underfloor system,bronze manifold, Underfloor Heating Thermal Actuator Thermostatic Electrical Radiator Actuator,brass valves,brass wine barrel faucet tap,filter that you can contact withTAIZHOU LAIMENG FLUID CO.,LTD
CERTIFICATE
CE FOR THERMAL ACTUATOR CE FOR MANIFOLD
All our product are strictly produced according to the technical requirement of the products & 100 % testing before shippment,and we can guarantee our products.
Packaging & Delivery
Packaging Details
Thermal-electric actuator normally close type for floor heating system
1. Regular Packing:
Inner packing: small box
Outer packing:Five-layer corrugated box
Bulk container /with pallets
2. Packing can be customized with your own brand and logo
Port
NINGBO/SHANGHA
Temperature control in intelligent HVAC systems on the market not aimed at energy saving will end nowhere- starting with the use of room thermostats and terminal thermal actuators. Thermal actuators are critical components within equipment ranging from thermostats to valves.
Thermal actuator is widely used in underfloor heating and ceiling radiant heating and cooling systems, air conditioning systems, radiator heating systems, and other systems that require temperature control or fluid on-off control, automatically switch the controlled loops by receiving signals from room thermostats or other electrical switches. Usually used in combination with a heating manifold.
Customize Solution
If you want to develop new thermal actuator, our team will assist you to achieve your idea according to these details as follow:
-Supply the shape design.
-Supply the spring force.
-Supply the voltage.
-Supply the dimension of full open and close for valve.
Hot Tags: thermostatic actuator, China thermostatic actuator suppliers, manufacturers, factory, electric pto actuator, water boiler components, brass thermostatic radiator valves, brass drain off valve, underfloor heating manifold actuator, 2 5 inch brass ball valve
