Underfloor Heating Actuator
LM709 Floor Heating Thermostat Head TRV Electric Thermal Actuator Used in conjuction with room thermostats and all our wiring centres. Actuators open or close ports on the manifold when there is a demand from a thermostat.
- Product Introduction
Used in conjuction with room thermostats and all our wiring centres. Actuators open or close ports on the manifold when there is a demand from a thermostat.
The thermal actuator is used with electrical on/off-controls to activate several types of valves and floor heating manifolds. The actuator is equipped with a visual position indicator to show the open or closed position of the valve. Our actuators can be provided with connections for for valves with M30x1.5 connection.Actuators are made for either 24 V (SELV) , 110V, 230 V or 240 V supply in both normally closed (NC) or normally open (NO) versions (valve positions with no supply voltage to the actuator).
Actuator for use with an Underfloor heating manifolds or Radiator Thermostatic Valves. Will fit all manifold and radiators valves
with M30 X 1.5 sizing. This is the most common fitting.
Product details
Technical Parameter
Model | LM709 |
Working Voltage | 230VAC/24 VAC |
Initial Current | About 50MA |
Power Consumption | 2W |
Protection Grade | IP41 |
Working Journey | ≥4.5~5.0mm |
Working Temperature | -20-50 |
Security Class | II(Double Insulation) |
Cable Length | 80cm |
Running Time | 180seconds (open-closed) |
CE Standard | 180seconds (open-closed) |
Actuator Connected with Manifolds/Valves
Use Instruction
ADAPTION CHECK
ACTUATOR INSTALLATION
When you install actuator, you should take the connect ring off at first, and install the ring on valve. Then press the actuator body on the ring.
Related Items
Company profile
 |  |
 |  |  |  |
CERTIFICATE
CE for electric thermal actuator CE for SS manifold/Brass manifold/Bronze manifold
Our product of our company is strictly produced according to the technical requirement of the
products & 100 % testing before shippment.
Packaging & Delivery
Packaging Details
1. Regular Packing:
Inner packing: small box
Outer packing:Five-layer corrugated box
Bulk container /Pallet packing is available.
2. Packing can be customized with your own brand and logo
Port
NINGBO/SHANGHA PORT
FAQ
Q1: Can I buy a 24V actuator from your company?
A: Yes, all our actuators have 230V and 24V optional.
Q2: What's the difference between NC and NO type actuator.
A: NC type actuator means normally closed type actuator. When it is not working, valve is in closed state. When actuator is working, it will control valve to open; NO type actuator means normally open type actuator. When it is not working, valve is in open state. When actuator is working, it will control valve to close.
Q3: Can I buy a M28x1.5 connect ring from your company?
A: Our general actuator connect ring dimension is M30x1.5. Other dimensions rings are not available. However, if you need a large amount, please also contact with us. We can provide them.
Hot Tags: underfloor heating actuator, China underfloor heating actuator suppliers, manufacturers, factory, electric actuator adc225s 24, electric linear servo actuators, 12v linear actuator, small electric actuator 12v, electric ball screw linear actuator, 12v push pull solenoid linear actuator
