
Underfloor Manifold Water Mixing Pump
Model:LM1004
Material:Brass Hpb 57-3
Nominal pressure :≤10bar
- Product Introduction
|
Model |
LM1004 |
|
Material |
Brass Hpb 57-3 |
|
Nominal pressure |
≤10bar |
|
Applicable medium |
water |
|
Working temperature |
≤100℃ |
|
Temperature control range |
30~70℃ |
|
Temperature control accuracy |
±1℃ |
|
Pump connection thread |
G11/2" |
|
Connection thread |
ISO228 Standard |
|
Specifications |
1" |
Introduction to the working principle of the floor heating mixing center; When the indoor high-temperature water supply is introduced into the floor heating system from the outside, it is mixed with the lower temperature floor heating return water cooled by the floor heating coil in the water mixing component; The water mixed at a suitable temperature enters the water separator after passing through a booster pump, and is then heated through a floor heating coil for heat dissipation; Booster pumps are used to provide power for mixing water; In a water mixing system, the water mixing component should have the function of controlling the temperature of the mixed water at the set value to avoid instability of the mixed water temperature as the water supply temperature changes; Warm water enters the ground heating system to protect it; When the water supply temperature is lower than the set value, the water mixing device can automatically open the high-temperature water channel to supply water to the floor heating, keeping the indoor temperature of the user from dropping too much, achieving the effect of automatic constant temperature

We also have other kind of mixing water valves,kindly check our website: www.laimeng-fluid.com for more other products.
Mixing water valve Used
Company Profile
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
We are TAIZHOU LAIMENG FLUID CONTROL CO.,LTD which is a experienced factory for Stainless steel manifold,brass water manifold,bronze manifold,thermal actuator,brass safety group valve,drain valve,radiator valve,mixing valve unit,filter,temperature controller.
If you have any iquiry for the above products that you can send to us,we will give you a good price.
Also we can do all according to the clients requiements.
Packaging & Delivery
Packaging Details
Mixing units for underfloor heating manifold for water heating system
1. Regular Packing:
Inner packing: small box
Outer packing:Five-layer corrugated box
Bulk container /with pallets
2. Packing can be customized with your own brand and logo
Port
NINGBO/SHANGHA

Selling point
1. The floor heating water mixing device adopts a speed regulation shielded silent circulating pump and a silent automatic valve, which has a long service life and does not disturb the people.
2. The temperature control switch can accurately, sensitively and reliably control the system's automatic constant temperature continuous mixed water supply. When the water supply is interrupted or the water supply temperature is lower than the designed water supply temperature, the pump will automatically stop and shut down.
3. Continuous constant temperature water supply can reduce the deposition of impurities and gas accumulation in the water in the coil, eliminate the hidden dangers of gas resistance and blockage, and extend the service life of floor heating.
4. Because the water mixing device has the functions of automatic start and stop, and double protection of overheating and low temperature, it provides certain conditions for the operation safety under the condition of unmanned management.
5. Economical and energy-saving, saving heat exchange stations, saving energy in internal circulation, and using water temperature changes to carry out intermittent work, reducing operating costs.
Hot Tags: underfloor manifold water mixing pump, China underfloor manifold water mixing pump suppliers, manufacturers, factory, 2 thermostatic mixing valve, thermostatic mixing valve, 3 way thermostatic control valve, saltwater mixing pump, 22mm thermostatic mixing valve, tmv2 thermostatic mixing valve














