Type of pressure valve

Apr 12, 2022|

Because the pneumatic control valve has the advantages of intrinsic explosion-proof and reliable performance, the domestic and foreign control valves are still mainly pneumatic.

In the past, the small flow control valve was officially produced in China. The maximum operating pressure can reach 100 kg/cm 2 , and the rated flow capacity C value can be from 0.05 to 0.0012. The valve seat diameter is 3 mm, the valve core is cylindrical, with one or several V-shaped grooves engraved on it, the valve stem stroke is 6 mm, and the valve does not have a matching positioner, so the control accuracy is poor.

my country has also introduced a small flow control valve. The flow capacity is about 0.001, and the spool is cylindrical with a notch. Working pressure is 300 kg/cm 2 stem travel 7/16 in., valve core is conical, the valve has a Moore Corporation top mount positioner.

The above-mentioned type of valve is characterized by simple structure and light weight. The commonly used valve seat aperture is 1/8 to 1/4 inches (about 3.175A-6.35 mm), and the stem travel is 1/4 to 1/2 inches (6.35 to 12.7 mm). The flow capacity of this type of valve can be as small as 0.00006 or even smaller.

Generally speaking, the cylindrical slotted spool is better than the conical in terms of characteristics. It can obtain design characteristics by changing the depth of the groove, but the latter has better adjustment accuracy because the fluid passing through the valve is distributed in the valve. the entire circumference of the core section. This kind of valve is often used in occasions where the accuracy requirement is not very high. However, the volume accuracy and reproducibility of characteristics are poor.

The flow capacity of the valve mainly depends on the orifice diameter. For a 1/16 inch orifice, the theoretical Cv value is about 0.06, or only close to the upper limit of small flow. To further reduce the flow, it is necessary to fundamentally reduce the stroke of the spool or restrict the opening of the orifice.


Send Inquiry